![]() You can also password protect a port or device to limit access to authorized users. Tip: Sharing problems may be resolved by physically disconnecting the device from its port. Share the interface through the application and plug the device back into the port. You should now be able to access the shared USB device from the client side. USB Redirector Server is sharing your USB ports rather than the devices. This enables you to freely disconnect one device and connect a different one. The newly attached device immediately appears and is available for client use with no configuration necessary. The first step in sharing a USB device remotely is to connect it to a shared interface on the USB redirector server. Best results are achieved by sharing a port after plugging in the device you want to access remotely. If you are certain that you know which port is free, you can share it before attaching a peripheral device. In this window, you can obtain supplemental information concerning the USB devices such as its serial number and manufacturer. Set the TCP port that you want to be employed with the connection. Tip: If you have problems sharing the device you may be successful by unplugging from the port. Share the port first and then reattach the device. You should be able to share it at this point. Now you can access the shared USB device from the client side. To shared devices on a macOS computer, perform the following steps. ![]() Click Local pane from the top of the window. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |